Altair WBP-200 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 10)

3.7.8 CHANGING THE BELTPACK NAME

With the Name MENU, the user can change the beltpack

name that appears on the display , under the

beltpack registration number, this name has 7

characters, selected by the user.

With the VOLUME switches, we can change the character currently selected (in

black) with the SELECT (ENTER) switch, the beltpack select the next character (if we

are in the last character, the beltpack name edition finished) ,

and with the MENU (ESCAPE) switch, the beltpack select the previous character

(when we are in the first character, the beltpack cancel the edition).

The beltpack name appears below the beltpack

registration number: .

This name is stored in the unit

FACTORY PRESET:

ALTAIR1.

3.7.9 OLED CONTRAST ADJUSTMENT

The display contrast can be changed using this menu,

between the values 1 and 10, to adapt to different ambient light

conditions. The OLED display it is visible from any angle, and the

contrast level does not affect the display viewing.

The display contrast is adjusted to its maximum intensity, and if the beltpack remain quiet

for thirty seconds, the display contrast level will fall, and if remain quiet for another thirty

seconds, the display shut off automatically, turning on when any key, or an external event

occurs.

This contrast display adjustment will remain on memory.

FACTORY PRESET:

MEDIUM.

3.7.11 KEYBOARD LOCK CONFIGURATION

With this menu, it is possible configure the keys (TOP,

FRONT or ALL) that the beltpack lock when activate this feature

(see section 3.7.12). This means that when lock the keys in the

wireless beltpack, the beltpack lock the keys configured in this section of the menu.

This keyboard lock configuration will remain on memory.

FACTORY PRESET:

ALL.

WBP-212 WIRELESS DUAL CHANNEL MANAGER BELTPACK

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

Altair WBP-200 Anleitung zur Fehlerbehebung Seite 10